|
The dimension is available in December 2005. | Technical Data | | Tyre | .....Rim..... | Tube and .....valve...... | Flap
................... | Max measurements in service | Size
.................... | Tread
................... | PR | LI 10) | Standard valve | Actual valve | | Width | Overall-Ø 2) | Width
+1% | Overall-Ø ±1% | | 12.00 R 20 |  | 20 | 176 | 8.5-20 | 11.00 | 200-20 5) | 338 | 1144 | - | - | | | | | | 12.00-20 | | | | - | - | | | | | | 127 D-Z | | | | | |
| Load-carrying capacity | Size
.................... | PR | Load-Index | Tyre pressure | Stagnation | On another vehicles 4) | On fork lifts | | LI | bar | at max. speed (km/h) | max. 25 km/h | | 10 | 25 | 40 5) | 50 5) | Load wheel | Steering wheel 6) | | 12.00 R 20 | 20 | 176 | 10,0 | 10720 | 9230 | 7100 | 6320 | - | 9230 | 7100 |
| Legend | 1) Radius stat.
A: load-carrying capacity on other vehicles cir. 25 km/h
B: load wheel carrying capacity on fork lifts cir. 25 km/h | | 2) The outer diameter on wheels with special treads can be exceeded by 2% in operation. | | 3) Use flap with centre valve hole. | | 4) Other vehicles, e.g. platform trucks, trailers, tractors, straddle carriers, forklifts without counterweight etc. | | 5) The steering wheel load capacities 16 mph (25 km/h) are to be applied for tyres on side-loading forklift truck, straddle carries and portal lift trucks with a maximum speed of 16 mph (25 km/h) | | 6) Maximum speed for IC 80 Extra Deep tread pattern= 25 mph (40 km/h). | | 7) A special tapered-base O-ring and a rim with valve aperture instead of valve slot is needed for the tubeless type. | | 8) The use of valve shield is recommended. | | 9) IC 30 tread pattern available at the moment only in A2 (max speed of 6 mph / 10 km/h) | | 10) A5 corresponding to 16 mph |
|
