Only specially trained persons should mount or remove tires. Serious injury may arise if the following instructions are not observed.

Use proper mounting/removal tools only. Refer to tool manufacturer's instructions.

1. Improper mounting tools can cause the bead to break.
2. Always match rim diameter with tire diameter. Mount tire only on proper sized rim.
3. For solid tires, use specially approved lubricant only.
4. Clean and lubricate both bead sidewalls and rim with approved lubricant.
5. Align tire and rim properly.
6. Spin wheel to check bead seating and alignment.
7. Allow for sufficient clearance to prevent tyre damages.
8. Change out damaged tyre.
9. Do not exceed max. load, speed and distance.
10. Non marking tires are not electrically conductive. For operation in hazardous atmosphere the vehicle must be grounded.